Omron K3HB-H User Manual page 93

Section 5 Functions and Operations
*
Important
Measurement
range upper limit
Power ON
Measurement
value
RESET
TIMING
The PV display will show "-----" in no measurement status.
Remarks
*
Important
Measurement
range upper limit
Power ON
Measurement
value
RESET
TIMING
The PV display will show "-----" in no measurement status.
Remarks
5-20
Sampling Hold
• The measurement is held from the rising edge of the TIMING
signal.
• When the measurement value exceeds the measurement range, a
sensor error will occur and all outputs will turn OFF.
• Measurements are not performed during RESET input and
TIMING inputs are disabled.
Measurement
point
No measurement Measurement value 1 Sensor error
Selecting operations for input errors
Operation will continue if input error enable is set to OFF (disabled) or
OVER (overflow).
Peak Hold
• The maximum value is held while measurement is being
performed (while the TIMING input is ON) and when the
measurement has been completed (when the TIMING input turns
OFF) the measurement value is refreshed using the held
maximum value.
• When the measurement value exceeds the measurement range
during measurement, a sensor error will occur, a sensor error will
immediately show on the display, and all outputs will turn OFF.
Also, the measurement at that time will be invalid.
• Measurements are not performed and TIMING inputs are disabled
during RESET input.
Measurement invalid
because a sensor error
Measurement
period
occurred during measurement.
No measurement Peak value 1 Sensor error
Selecting operations for input errors
Operation will continue if input error enable is set to OFF (disabled) or
OVER (overflow).
A sensor error occurs and all outputs are turned
OFF if the measurement range is exceeded.
Measurement invalid because
a sensor error occurred during
measurement.
No measurement
P.5-29
A sensor error occurs and all outputs are turned
OFF if the measurement range is exceeded.
Measurement invalid
because reset input received
Measurement
during measurement. period
No measurement
P.5-29
Measurement value 2
Peak value 2