Copying Bank Comparative Set Values - Omron K3HB-H User Manual

Section 5 Functions and Operations

5.39 Copying Bank Comparative Set Values

4
copy
L
(COPY)
5-98
The bank copy function is used to specify a bank between 0 and 7 and
copy the group of comparative set values in that bank to all banks.
Parameter Setting Procedure
A Press the L [LEVEL] Key for at least
3 s in RUN level to move to the initial
setting level.
0" is displayed on the level/bank
• "
L
display to indicate the initial setting level.
B Press the L [LEVEL] Key several times to
move to the comparative set value level.
4" is displayed on the level/bank
• "
L
display to indicate the comparative
set value level.
C Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
D Use the U [UP] Key to select the bank
to be copied from.
E Press the M [MODE] Key to switch to
the next parameter.
• Change the comparative set values
HH, H, L, and LL as required.
F Press the M [MODE] Key several times
to change the PV display to "copy."
G Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
H Use the U [UP] Key to change the SV
display to "on."
X V S H
L
0
L
0."
Displays "
3 s min.
L
L
sv. bnk
4
L
0
4."
Displays "
L
S
sv. bnk
4
L
0
U
sv. bnk
4
L
1
M
sv1. hh
4
L
10000
M
copy
4
L
off
S
copy
4
L
off
U
copy
4
L
on