Performing Output Tests - Omron K3HB-H User Manual

Section 5 Functions and Operations

5.37 Performing Output Tests

t
test
L
(TEST)
5-92
The output test function is used to set test measurement values using
the keys to check the comparative outputs against the set comparative
set values.
A test measurement value is set using the following parameter.
Parameter
Test input
Parameter Setting Procedure
A Press the L [LEVEL] Key for at least
3 s in RUN level to move to the initial
setting level.
0" is displayed on the level/bank
• "
L
display to indicate the initial setting
level.
B Press the L [LEVEL] Key several
times to move to the output test level
"test."
t" is displayed on the level/bank
• "
L
display to indicate the output test
level.
C Press the S [SHIFT] Key.
• The test input will be 0 after moving
to output test status.
D Use the U [UP] and S [SHIFT] Keys
to change the set value.
• Use the U [UP] Key to increase the
set value.
• Use the S [SHIFT] Key to decrease
the set value.
• Continue pressing the key to quickly
increase or decrease the set value.
E Once the output test has finished,
press the L [LEVEL] Key for at least
1 s to return to RUN level.
Set value Meaning of set value
off
Output test disabled
- 1 9999 to
-19999 to 99999
99999
L
3 s min.
L
S
U S
L
1 s min.
Output test level
X V S H
0
L
0."
Displays "
L
test
t
L
off
t."
Displays "
L
test
t
L
0
test
t
L
1234
123. 4
123. 4