Omron K3HB-H User Manual page 98

Parameter Setting Procedure
A Press the L [LEVEL] Key for at least
3 s in RUN level to move to the initial
setting level.
0" is displayed on the level/bank
• "
L
display to indicate the initial setting
level.
B Press the L [LEVEL] Key for less than
1 s in initial setting level to move to the
input adjustment level.
1" is displayed on the level/bank
• "
L
display to indicate the initial setting
level.
C Press the M [MODE] Key several times
to change the PV display to "ini. 1."
D Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
E Use the U [UP] and the S [SHIFT]
Keys to change the set value.
F Press the M [MODE] Key to switch the
PV display to "iss. 1.".
G Repeat steps D through F to set "iss.
1," "isi. 2" and "iss. 2."
5.6 Shifting the Temperature Input
L
3 s min.
Displays "
L
L
1s max.
M
L
S
L
U S
M
0
L
0."
L
1
isi1
1
-200. 0
isi1
1
-200. 0
isi1
1
L
-100. 0
iss1
1
L
0. 00
5-25