Table of Contents
Advertisement
Key operations
Teaching
During scaling, the input value
during measurement can be
set, as is, as the scaling input
value.
P.5-14
X
V
(Setting Scaling)
Outputs
Comparative output pattern
The comparative output
pattern can be selected as
standard output, zone output,
and level output.
P.5-44
X
V
S
PASS output change
Comparative results other
than PASS and error signals
can be output from the PASS
output terminal.
P.5-57
X
V
S
Output logic
Reverses the output logic of
comparative outputs for
comparative results.
P.5-59
X
V
S
Linear output
Outputs currents or voltages
proportional to measurement
values as they change.
P.5-65
X
V
S
Key protection
Limits key-operated level and
parameter changes to prevent
inadvertent key operations and
malfunctions.
P.5-102
S
Hysteresis
Prevents comparative output
chattering when the
measurement value fluctuates
slightly near the set value.
P.5-46
H
X
Output OFF delay
Connects the comparative output
OFF timing for a set interval.
Comparative output ON times can
be held when comparative results
change quickly.
P.5-55
H
X
Startup compensation timer
Constant-time measurements
can be stopped by an external
signal input.
P.5-27
H
X
Standby sequence
Turns the comparative output
OFF until the measurement
value enters the PASS range.
P.5-61
H
X
1.1 Main Functions and Features of the K3HB
Output refresh stop
Holds the output status when
comparative results outputs
other than PASS turn ON.
P.5-52
V
S
H
Shot output
Produces a constant
comparative output ON time.
P.5-49
V
S
H
Output test
Output operation can be
confirmed without actual input
signals, by setting test
measurement values using
the keys.
P.5-90
V
S
H
V
S
H
X
V
S
H
X
V
S
H
X
V
S
H
1-3
Hide quick links:
Advertisement
Table of Contents
