■ Auto / Manual
Command
Response
■ Initialize settings
Command
Response
6.9 Commands and responses (Communication/CompoWay/F)
Instruction
Related
MRC
SRC
code
information
"30"
"05"
"09"
Related
information
Ch
"00"
1
"01"
"10"
2
"11"
"20"
3
"21"
"30"
4
"31"
"F0"
All
"F1"
Use this command to select auto or manual operation.
This command is used in setting area 0.
To use this command, "Write via communication" must be enabled
using the "Write via communication" operation command.
MRC
SRC
Response code
"30"
"05"
"0000"
Response codes: The above indicates a normal end. For the response
codes, see "6.7 Operation commands (Communication/CompoWay/
F)" (P.6-11).
Instruction
Related
MRC
SRC
code
information
"30"
"05"
"0B"
"00"
This returns all settings to the initial settings.
This command is used in setting area 1. If used in setting area 0, an
operation error will result.
To use this command, "Write via communication" must be enabled
using the "Write via communication" operation command.
MRC
SRC
Response code
"30"
"05"
"0000"
Response codes: The above indicates a normal end. For the response
codes, see "6.7 Operation commands (Communication/CompoWay/
F)" (P.6-11).
Description
Operation mode
Auto
Manual
Auto
Manual
Auto
Manual
Auto
Manual
Auto
Manual
6-27