Controller Status Read (Communication/Compoway/F) - Omron E5AR - MANUAL 2 User Manual

Section 6 Communication (CompoWay/F)

■ Controller status read (Communication/CompoWay/F)

Command
Response
◆ Operation state
◆ Related information
6-30
MRC SRC
"06" "01"
This command reads the operation status of the E5AR/ER.
The command can be used in any state of the E5AR/ER.
MRC SRC Response code
"06" "01" "0000"
Response codes: The above indicates a normal end. For the response
codes, see "6.7 Operation commands (Communication/CompoWay/
F)" (P.6-11).
7 6 5 4 3 2 1 0 Bit position
0 0 0 0
ch4 ch3 ch2 ch1
Bit position Operation state
00
01
(MV at PV error output)
10
(Including setting area 1)
11
The operation state of each channel is indicated using a 2-bit code.
7 6 5 4 3 2 1 0 Bit position
Bit position Status
0 Blank
1 Blank
2 CT input error
3 RSP input error
4 Potentiometer error
5 Exceeds display range
6 Input error
7 Blank
* OR of channels set in "Number of enabled channels".
* When the channel does not exist, is "Not occurred: 0".
* If this command is used in setting area 1, the related information is
undefined.
Operation
state Related information
Operating
Error
Stopped
Manual mode
Bit description
0
Not occurred
Not occurred
Not occurred
Not occurred
Not occurred
1
Occurred
Occurred
Occurred
Occurred
Occurred