Omron E5AR - MANUAL 2 User Manual page 264

Bar graph display item
Function
Setting
Display auto-return time
Function
Setting
Display refresh period
Function
Setting
bart
• Use this setting to select the contents of the bar graph display of the
E5AR.
• The bar graph of the E5AR is 10 segments.
Setting range
off
: No bar graph display
1eu
: Deviation 1 EU/segment
10eu : Deviation 10 EU/segment
20eu : Deviation 20 EU/segment
100eu: Deviation 100 EU/segment
o
: (Standard type) Heating MV
(Position proportional type) Valve opening
c-o
: (Standard type) Cooling MV
ret
• This setting is used to select the amount of time without key
operation that must elapse for the display to revert to the "PV/SP"
screen when in "Operation level", "Adjustment level", "Adjustment
level 2", "Bank setting level", "PID setting level", "Approximation
setting level", or "Monitor item level".
• When 0 is selected, the function is disabled (no auto reset).
Setting range
0 to 99
d.ref
• This setting is used to lengthen the refresh period of the monitor
value display. This only slows the display refresh cycle; it does not
affect the update period of the PV during control.
• To disable the function, select OFF.
Setting range
off, 0.5, 1, 2, 4
8.13 Display adjustment level (l.4)
Units Default value
Units Default value
Sec 0
Units Default value
Sec 0.5
l.4
E5AR
o
l.4
l.4
8-61