Omron E5AR - MANUAL 2 User Manual page 30

● Auxiliary output
assignments
Auxiliary output Auxiliary output assignment
Channel 1 alarm 1
SUB1
Channel 1 alarm 2
SUB2
SUB3 Channel 1 alarm 3
SUB4 Channel 1 alarm 4
Channel 2 alarm 1
Channel 1 input error
Channel 2 alarm 2
Channel 3 alarm 1
Channel 1 RSP input error
Channel 2 alarm 3
Channel 3 alarm 2
Channel 4 alarm 1
Channel 2 alarm 4
Channel 3 alarm 3
U-ALM output Channel 4 alarm 2
Channel 2 input error
Channel 3 alarm 4
Channel 4 alarm 3
Channel 4 alarm 4
Channel 4 input error
1.3 Input/output Configuration and Main Functions
When used for transfer output type, assign the data to be transferred to
an unused output.
For outputs supporting multi-output, specify pulse voltage output or
linear current output according to the multi-output output type.
For linear current output, 0 to 20 mA or 4 to 20 mA can be selected.
Pulse voltage output is 12 V DC, 40 mA.
Output
Multi-output output type
OUT1
Pulse voltage output
OUT2
Linear current output
OUT3
OUT4
Use this setting to assign what type of data is output from each
auxiliary output.
For the multi-point input type, assignment data can be set for channels
2 and higher as needed for the number of channels. The U-ALM output
is an OR output with alarm functions 1 to 4 for all channels.
Channel 1
Channel 2
Channel 3
Channel 4
Linear current output output type
0 - 20 mA
4 - 20 mA
All Channels
All-channel alarm 1 OR output
All-channel alarm 2 OR output
All-channel alarm 3 OR output
All-channel alarm 4 OR output
All-channel input error OR output
All-channel RSP input error OR output
1-11