Omron E5AR - MANUAL 2 User Manual page 10

● Special markings
(1) Important
This appears in cases where incorrect settings or operation will prevent a
function from achieving the expected result.
(2) Hint
This gives useful hints, advice, and other supplemental information.
(3) Marks used to indicate "Function," "Setting," "Monitor," and "Reference" in "Setting
● Abbreviations
Abbreviations used in the setting data, illustrations, and text are as follows.
Abbreviation
* Data after scaling is shown in industrial units such as °C, m, and g, and "EU" is
used to indicate the minimum increment of such a quantity. For example, the
minimum increment of 50.02 m is 0.01 m, and thus 1 EU would be equal to 0.01 m.
● Notation used for settings
Letters, numbers and abbreviations in settings that appear in the E5AR/ER display
are as follows.
a
A
n
N
0
0
Set the input type before setting the scaling value.
Important If the input type is changed after setting the scaling value, the scal-
ing value will be automatically initialized.
The rise and fall values of the SP ramp of the E5AR/ER can be set
Hint
separately.
Data" in Section 8 are explained in Section 8.
Meaning
PV Present value
SP Set point
SV Set value
AT Auto-tuning (A.T)
EU Unit of industrial quantity*
ch Channel
b c d e
B C D E
o p q r
O P Q R
1 2 3 4
1 2 3 4
f g h i
F G H I
s t u v
S T U V
5 6 7 8
5 6 7 8
j k l m
J K L M
w x y z
W X Y Z
9 - 1
9 -1 (Most signif-
icant digit)
IX