Omron E5AR - MANUAL 2 User Manual page 212

Reference
Reference
CH
Ramp SP monitor
Function
Monitor
Reference
Reference
CH
MV monitor (heating)
Monitors the heating MV during operation.
Function
Monitor
● Related setting data
"PV/SP" (Operation level)(P.8-7)
"SP mode" (Adjustment level) (P.8-14)
"Remote SP ramp rise value" "Remote SP lower limit" (Input initial
setting level) (P.8-38)
"Control mode" (Control initial setting level) (P.8-43)
sp-m
SP ramp rise value
• Monitors the SP during ramp.
• The ramp function limits the rate of change of the SP.
• The setting is only displayed if a value is entered for "SP ramp rise
value" or "SP ramp fall value".
• For other than ramp, the SP value is the same as in "PV/SP".
Monitor range
SP lower limit to SP upper limit
● Related setting data
"PV/SP" (Operation level)(P.8-7)
"SP ramp time unit", "SP ramp rise value", "SP ramp fall value"
(Adjustment level) (P.8-18)
"SP upper limit", "SP lower limit" (Control initial setting level) (P.8-43)
o
• Monitors the MV of standard control and the heating MV of heating/
cooling control.
Control
Standard
Heating/
cooling
8.3 Operation level ( )
0 or SP ramp fall value 0
Units
EU
Standard control, heating/cooling control
Monitor range
-5.0 to 105.0
0.0 to 105.0
Units
%
%
8-9