Omron E5AR - MANUAL 2 User Manual page 271

Section 8 Setting data
Setting initialization
Function
Operation
PF1 setting
PF2 setting
Function
8-68
init
• Use this setting to return all settings to their default values.
ON (on) : Initialize all settings.
OFF (off) : "Setting initialization" reverts to "OFF" after the settings
are initialized.
pf1
pf2
• This setting is used to assign functions to the PF1 and PF2 keys to
enable them to be used as function keys.
• When performing multi-channel control, the PF2 key functions as a
CH key, and thus cannot be used as a function key ("PF2 setting"
does not appear).
Setting
Description
values
OFF: off
Disabled
RUN: run
Run
STOP: Stop
stop
R-S: r-s
Run/Stop
ALLR: allr Run all
ALLS: alls Stop all
AT: at
AT Execute/Can-
cel
BANK: Bank selection
bank
A-M: a-m A key
PFDP: pfdp Monitor/Setting
item
• Hold down the PF1 or PF2 for at least 1 second to execute the
function selected in "PF1 setting" or "PF2 setting".
If "Monitor/Setting item" is selected, the display will scroll through
monitor/setting items 1 to 5 each time you press the key.
l.adf
l.adf
Function
Does not function as a function key.
Run currently displayed channel.
Stop currently displayed channel.
Switch between run and stop for cur-
rently displayed channel.
Run all channels.
Stop all channels.
Switch between AT execute and AT
cancel.
AT run is executed for the currently
selected PID set.
Switch through the bank numbers
(adds 1 to the current bank number).
Switch between auto and manual.
Display monitor/setting item.
Select "Monitor/Setting item 1" to
"Monitor/Setting item 5" (Special
function level).