Omron E5AR - MANUAL 2 User Manual page 259

Section 8 Setting data
CH
Alarm 1 hysteresis
Alarm 2 hysteresis
Alarm 3 hysteresis
Alarm 4 hysteresis
Function
Setting
Reference
Reference
8-56
alh1
alh2
alh3
Alarm is assigned to auxiliary output and
alh4
alarm type is set to other than "No alarm".
• These settings are used to enable hysteresis for alarms 1, 2, 3, and
4.
Setting data
Alarm 1 hysteresis
Alarm 2 hysteresis
Alarm 3 hysteresis
Alarm 4 hysteresis
● Related setting data
"Bank alarm " (Bank setting level) (P.8-28)
"Bank alarm upper limit
setting level) (P.8-29)
"Auxiliary output assignment" (Control initial setting 2 level) (P.8-48)
"Alarm type" (Alarm setting level) (P.8-54)
"Alarm latch" (Alarm setting level) (P.8-55)
"Standby sequence restart" (Alarm setting level) (P.8-57)
Setting range Units
0.01 to 99.99 %FS
", "Bank alarm lower limit" (Bank
l.3
Default
value
0.02