Omron E5AR - MANUAL 2 User Manual page 273

Section 8 Setting data
Number of enabled channels
Function
Setting
Reference
Reference
RAM write mode
Function
Setting
Reference
Reference
8-70
ch-n
• This setting is used to set the number of enabled channels when
using multiple channels on a multi-point input type.
Setting range
1 to 4
* The default value and setting range vary depending on the control
mode setting of the multi-point input type.
2-input type: Proportional control, standard control with remote SP,
heating/cooling control with remote SP: "1"
Other modes: "2"
4-input type: "4"
● Related setting data
"Begin display scan after power on", "Display scan period" (Display
adjustment level) (P.8-62)
ramm
• Use this setting to select the write mode.
Write mode
When writing setting data to setting area 0 by
Backup mode communication, the data is also written to internal
non-volatile memory.
When writing setting data to setting area 0 by
communication, the data is not written to internal
RAM write mode non-volatile memory. However, changes to setting
data by key operation are written to non-volatile
memory.
• When the write mode is changed from RAM write mode to backup
mode, the setting data in setting area 0 is written to internal non-
volatile memory.
Setting range
bkup: Backup mode
ram : RAM write mode
● Related information
"5.9 Using communication functions" (P.5-34)
Multi-point input type
Units Default value
*
Explanation
Units Default value
bkup: Backup mode
l.adf
l.adf