Omron E5AR - MANUAL 2 User Manual page 231

Section 8 Setting data
CH
Bank alarm 1
Bank alarm 2
Bank alarm 3
Bank alarm 4
( : 0 to 7)
Use this setting to store alarm values for alarms 1 to 4 in each bank.
Function
Setting
Reference
Reference
8-28
.al-1
.al-2
.al-3
.al-4
• Set the values of alarms 1 to 4 in each of banks 0 to 7.
Setting range
-19999 to 99999
This setting can be used when the alarm type is other than "none",
"Upper- and lower-limit alarm", "Upper- and lower-limit range alarm",
or "Upper- and lower-limit alarm with standby sequence".
● Related setting data
"Alarm type" (Alarm setting level) (P.8-54)
"Alarm latch" (Alarm setting level) (P.8-55)
"Alarm hysteresis" (Alarm setting level) (P.8-56)
"Standby sequence restart" (Alarm setting level) (P.8-57)
"Auxiliary output non-exciting" (Alarm setting level)(P.8-58)
l.bnk
Alarm function is enabled
Units Default value
EU 0