Omron E5AR - MANUAL 2 User Manual page 254

Extraction of square root 1 enable
Extraction of square root 2 enable
Function
Setting
Reference
Reference
Straight-line approximation 1 enable
Straight-line approximation 2 enable
Function
Setting
Reference
Reference
Broken-line approximation 1 enable
Function
Setting
sqr.1
Extraction of square root 3 enable
sqr.2
Extraction of square root 4 enable
• Use these settings to enable or disable extraction of square root
operations for each input.
Setting range
off : Disable
on : Enable
● Related setting data
"Extraction of square root
scl.1
scl.2
• Use these settings to enable or disable straight-line approximation.
Setting range
off : Disable
on : Enable
● Related setting data
"Straight-line approximation
input 2", "Straight-line approximation
approximation output 2" (Approximation setting level) (P.8-33)
fnc.1
• Use this setting to enable or disable broken-line approximation for
input 1.
Setting range
off : Disable
on : Enable
8.11 Control initial setting 2 level (l.2)
sqr.3
sqr.4
Units Default value
off
Low-cut point" (Adjustment level 2) (P.8-24)
Proportional control
Units Default value
off
input 1", "Straight-line approximation
output 1", "Straight-line
Units Default value
off
l.2
l.2
l.2
8-51