Omron E5AR - MANUAL 2 User Manual page 101

Section 4 Settings Required for Basic Control
◆ When Auto / Manual is selected with the PF1 setting or PF2 setting
(Initially the PF1 setting is Auto / Manual.)
1 25.0
0.0
0.0
1 25.0
0.0
manu
1 25.0
0.0
0.0
◆ When Auto / Manual is not selected with either the PF1 setting or PF2 setting
1 25.0
0.0
0.0
1 a-m
auto
1 a-m
manu
1 25.0
0.0
manu
4-30
The procedure for switching to manual mode during control and
changing the MV is explained in the following.
key for Auto / Manual at least 1 second.
1. Hold down the
PF
MANU indicator lights up and the mode changes to manual.
To return to auto mode, hold down the
MANU indicator goes off and the mode changes to auto.
1. Press the M key repeatedly to select "a-m: Auto / Manual".
2. Press the U key to switch to "manu: Manual". The MANU indicator lights
up and the mode changes to manual.
To resume control, follow the same procedure to switch back to "auto:
Auto". The MANU indicator goes off and the mode changes to auto.
Switching between auto and manual is also possible by
event input or communication.
Hint
For event input switching, see "5.7 Using event input" (P.5-
29). For communication switching, see "5.9 Using com-
munication functions" (P.5-34).
key at least 1 second.
PF
The
The