Omron E5AR - MANUAL 2 User Manual page 125

Section 5 Functions and Operations
● Monitor/Setting item
PF1 monitor / Setting item 1
Setting
pf1.1
item 5
pf1.5
1
l.adf
l.adf
PF2 monitor / Setting item 1
Setting
pf2.1
item 5
pf2.5
1
l.adf
l.adf
5-22
"PF1 setting" or "PF2 setting" can be set to "Monitor/Settings (pfdp)"
to display monitor/settings using a function key.
The content to be displayed is set for each channel in "Monitor /
Setting item 1" through "Monitor / Setting item 5" of the corresponding
function key.
The selections are shown in the following table (for the setting (or
monitor) ranges, see the respective explanations of the setting data).
Setting
value
0 Disabled
1 PV/SP/Bank No.
0
2 PV/SP/MV
3 PV/Deviation
4 Proportional band (P)
5 Integral time (I)
6 Derivative time (D)
7 Alarm 1
8 Alarm upper limit 1
0
9 Alarm lower limit 1
10 Alarm 2
11 Alarm upper limit 2
12 Alarm lower limit 2
13 Alarm 3
14 Alarm upper limit 3
15 Alarm lower limit 3
16 Alarm 4
17 Alarm upper limit 4
18 Alarm lower limit 4
19 Bank No.
◆Displaying "Monitor/Setting item"
To display "Monitor/Setting item", press the function key in
Operation, Adjustment, Adjustment 2, Bank setting, PID setting,
Approximation setting or Monitor item level.
Press the key repeatedly to scroll from "Monitor/Setting item 1" to
"Monitor/Setting item 5". After "Monitor/Setting item 5", the display
changes to the first parameter in RUN level.
* If any of settings "Monitor/Setting item 1" through "Monitor/Setting
item 5" are disabled, those settings will not appear and the display
will show the next enabled setting.
Description
Monitor/Setting
Can set (SP)
Can set (SP)
Monitor only
Can set
Can set
Can set
Can set
Can set
Can set
Can set
Can set
Can set
Can set
Can set
Can set
Can set
Can set
Can set
Can set
Remarks
Display
p
i
d
al-1
al1h
al1l
al-2
al2h
al2l
al-3
al3h
al3l
al-4
al4h
al4l
bank