• If the "Input type", "Scaling display value 1, 2", "SP upper and lower
limit", or "Temperature units" setting is changed when "SP" or "Ramp
SP" is selected, the "Transfer output upper limit" and "Transfer output
lower limit" will be respectively returned to the upper and lower limits
of the setting range.
• If an input error occurs when the transfer output assignment is set to
"PV", the transfer output changes to the upper limit and it changes to
the lower limit in the case of reverse scaling.
Before change
After upper-limit
change
Upper-and lower-limit value
Upper-and lower-limit value of transfer type scaling
Display
Setting data
characters
name
Control / Transfer
out.
output 1 to 4
assignment
trh.
Transfer output 1
to 4 upper limit
Transfer output 1
trl.
to 4 lower limit
: 1 to 4
5.8 Using transfer output
SP limit
Transfer type scaling range
A
Change the
upper-limit value
from A to B
B
Level
(Display 3)
Control initial
Specify Control /
setting 2 (l.2)
Transfer output
Control initial
Transfer output
setting 2 (l.2)
scaling
SP
SP
Use
5-33