Omron E5AR - MANUAL 2 User Manual page 232

CH
Bank alarm upper limit 1
Bank alarm upper limit 2
Bank alarm upper limit 3
Bank alarm upper limit 4
( : 0 to 7)
If an alarm mode with upper- and lower-limit settings is selected for "Alarm 1 type" through "Alarm 4 type",
the upper limit and lower limit are set separately.
Function
Setting
Reference
Reference
.al1h
Bank alarm lower limit 1
.al2h
Bank alarm lower limit 2
.al3h
Bank alarm lower limit 3
.al4h
Bank alarm lower limit 4
• Set the upper and lower-limits of alarms 1 to 4 in banks 0 to 7.
• For temperature input, the decimal point position will depend on the
selected sensor. For analog input, the position is set using the
"Decimal point position" setting.
Setting range
-19999 to 99999
This setting can be used when the alarm type is "Upper- and lower-
limit alarm", "Upper- and lower-limit range alarm", or "Upper- and
lower-limit alarm with standby sequence".
● Related setting data
"Alarm type" (Alarm setting level) (P.8-54)
"Alarm latch" (Alarm setting level) (P.8-55)
"Alarm hysteresis" (Alarm setting level) (P.8-56)
"Standby sequence restart" (Alarm setting level) (P.8-57)
"Auxiliary output non-exciting" (Alarm setting level) (P.8-58)
8.6 Bank setting level (l.bnk)
l.bnk
.al1l
.al2l
Alarm
.al3l
upper- and
.al4l
lower-limit
alarm
Units Default value
EU 0
type is
8-29