Omron E5AR - MANUAL 2 User Manual page 257

Section 8 Setting data
CH
Alarm 1 type
Alarm 2 type
Alarm 3 type
Alarm 4 type
Function
Setting
Reference
Reference
8-54
alt1
alt2
alt3
alt4
• These settings are used to select the type of alarms 1 through 4.
Setting data Setting range
0: No alarm function
1: Upper- and lower-limit alarm
2: Upper limit alarm
3: Lower limit alarm
4: Upper- and lower-limit range alarm
5: Upper- and lower-limit alarm with
standby sequence
Alarm 1 type
6: Upper limit alarm with standby
Alarm 2 type
sequence
Alarm 3 type
7: Lower limit alarm with standby
Alarm 4 type
sequence
8: Absolute-value upper-limit alarm
9: Absolute-value lower-limit alarm
10: Absolute-value upper-limit alarm
with standby sequence
11: Absolute-value lower-limit alarm
with standby sequence
● Related setting data
"Bank alarm value " (Bank setting level) (P.8-28)
"Bank alarm upper limit
setting level) (P.8-29)
"Auxiliary output assignment" (Control initial setting 2 level) (P.8-48)
"Alarm latch" (Alarm setting level) (P.8-55)
"Alarm hysteresis" (Alarm setting level) (P.8-56)
"Standby sequence restart" (Alarm setting level) (P.8-57)
Alarm is assigned to auxiliary output.
Units
", "Bank alarm lower limit
l.3
Default value
2: Upper
limit
alarm
" (Bank