Omron E5AR - MANUAL 2 User Manual page 240

Input 1 temperature units
Input 2 temperature units
Input 3 temperature units
Input 4 temperature units
Function
Setting
Reference
Reference
CH
Scaling input value 1
Scaling display value 1
Scaling input value 2
Scaling display value 2
Decimal point position
Function
Setting
Reference
Reference
i1du
i2du
i3du
i4du
• Select Celsius (°C) or Fahrenheit (°F) for the temperature units.
Setting range
c: °C
f: °F
● Related setting data
"Input Type" (Input initial setting level) (P.8-36)
inp.1
dsp.1
inp.2
dsp.2
dp
• These settings are used when the input type is analog input.
• Scaling is carried out for analog input. The display value for "Scaling
input value 1" is set in "Scaling display value 1", and the display
value for "Scaling input value 2" is set in "Scaling display value 2".
• "Decimal point position" is used to specify the decimal point position
of setting data (SP, etc.) for which the units are "EU".
• Scaling settings for inputs 2 to 4 of multi-point input types are set in
channels 2 to 4. Press the
input channel and then set the scaling.
Setting data
Scaling input value 1
Scaling display value 1
Scaling input value 2
Scaling lower limit + 1 to
Scaling display value 2
Decimal point position
* The units depend on the input type settings.
● Related setting data
"Input type" (Input initial setting level) (P.8-36)
8.9 Input initial setting level (l.0)
Input type is temperature input
Units Default value
c: °C
Input type is analog input
key to change to the desired analog
CH
Setting range Units
Input lower limit to
input upper limit
-19999 to
EU
Scaling upper limit 1
Input lower limit to
input upper limit
EU
99999
0 to 4
l.0
l.0
Default value
4
0
20
100
0
8-37