Omron E5AR - MANUAL 2 User Manual page 220

CH
Position proportional dead band
Function
Setting
Reference
Reference
CH
Open/Close hysterisis
Function
Setting
Reference
Reference
db
• This sets the output hold interval (the interval while switching the
open output and close output ON and OFF) during position propor-
tional control.
Data range
0.1 to 10.0
● Related setting data
"Open/Close hysterisis" (Adjustment level) (P.8-17)
oc-h
• This setting is used to add hysteresis when switching the open
output and close output ON and OFF during position proportional
control.
Data range
0.1 to 20.0
● Related setting data
Position proportional dead band (Adjustment level) (P.8-17)
8.4 Adjustment level (l.adj)
l.adj
Position proportional control type
Units Default value
% 2.0
l.adj
Position proportional control type
Units Default value
% 0.8
8-17