Chapter 2
Configuration Parameters
Book C
syslog_facility
This Annex parameter defines the local facility to which the UNIX
syslogd daemon sends RA 6300 syslog messages. Valid options are
log_local0 through log_local7. The default is log_local7.
If the host to which messages are logged does not support 4.3BSD
logging, this parameter is ignored and messages are logged by priority
level (defined by syslog_mask).
syslog_host
This Annex parameter defines the IP address of the host that logs RA 6300
messages. The default, 0.0.0.0, causes the RA 6300 to broadcast its log
messages.
syslog_mask
This Annex parameter defines the priority levels that the RA 6300 logs.
The options are all, none, or a combination of levels separated by
commas. The default, none, disables logging.
Table C-34
lists the levels
in priority order (see Event Logging Using syslog on page B-37 for more
details on using syslog for event logging).
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-102