Bay Networks 6300 Supplement Manual page 376

Chapter 1 Network Administration
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
B-10
Table B-2. Arguments for the netstat Command (continued)
Argument Description
-n Displays all network addresses as numbers rather than
names or symbols; can be used in combination with –
A, –a, –i, –r, –t. It displays the IP addresses and TCP
ports in decimal notation.
-g Displays RIP statistics.
-m Displays statistics for memory buffer allocation.
-R Displays information about rotaries.
-r Displays the routing tables, including dial-out routes.
-ra Displays only Appletalk routes.
-ri Displays only IP routes
-s Displays network protocol statistics. LAT statistics
display only if the correct lat_key value is set.
AppleTalk statistics display only if the correct
option_key value is set.
-rs Displays routing statistics.
-t Displays the default active connection information
along with the attached device name.
-x Displays information about IPX.
-xi Displays information about RA 6300s currently in use
for dial-in or LAN-to-LAN routing.
-x? Displays information about using the netstat –x
command.
(continued on next page)
Book B