Bay Networks 6300 Supplement Manual page 87

Book A
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
The following example uses the admin command show port all to display
all asynchronous and TA global port parameters.
annex#: admin
admin: show port all
global port:
Port Generic Parameters
mode: cli
term_var: ""
cli_interface: uci
stop_bits: 1
max_session_count: 3
broadcast_direction: port
cli_imask7: Y
tcp_keepalive: 0
interactive
dedicated_arguments: ""
Flow Control and Signal Parameters
input_flow_control: eia
input_stop_char: ^S
output_start_char: ^Q
ixany_flow_control: N
v120_mru: 256
Port Timers and Counters
forwarding_timer: off
cli_inactivity: off
input_is_activity: Y
reset_idle_time_on: input
short_break: Y
Port Security Parameters
user_name: ""
connect_security: N
port_password: "<unset>"
ipx_security: N
(continued on next page)
Chapter 3 Configuring the PRI Interface, Global Ports,
location: ""
prompt: ""
data_bits: 8
parity: none
allow_broadcast: Y
imask_7bits: N
banner: Y
default_session_mode:
resolve_protocol: connect
input_start_char: ^Q
output_flow_control: eia
output_stop_char: ^S
need_dsr: N
forwarding_count: 0
inactivity_timer: off
output_is_activity: N
long_break: Y
autodetect_timeout: 30
cli_security: N
port_server_security: N
ipso_class: none
A-59