Remote_Address; Table C-27. Arguments For The Remote_Address Parameter - Bay Networks 6300 Supplement Manual

Chapter 2 Configuration Parameters
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-92

remote_address

This PRI B channel parameter associates IP address(es) with B
channel(s). This parameter works only when the mode parameter is set
to slip or ppp. The syntax is:
set pri b[=channel_range | all] remote_address ip_addr [increment]
Table C-27 describes the arguments used with remote_address.
If address_origin is set to acp, the remote address specified in the
acp_dialup file overrides the remote address described here.

Table C-27. Arguments for the remote_address Parameter

Argument Description
channel_range An integer specifying the number of a single B channel,
a list of B channel numbers separated by commas, a
range of B channel numbers separated by a hyphen, or
the keyword all, which specifies all B channels. If not
specified, 23 (for PRI/T1 lines) or 30 (PRI/E1 lines) IP
addresses are assigned based on the value of increment.
ip_addr The IP address to be assigned to the B channel if only
one channel is specified in channel_range, or the IP
address to be assigned to the first channel in
channel_range.
increment An integer specifying how ip_addr is to be incremented
to automatically generate IP addresses for the B channels
specified in channel_range. Use this for automatic IP
address assignment. If ip_addr is set to 132.245.22.2,
increment is set to 2, and 3 B channels are specified, the
RA 6300 assigns IP addresses 132.245.22.2,
132.245.22.4, and 132.245.22.6 to the B channels. The
default increment is 0.
Book C