Bay Networks 6300 Supplement Manual page 350

Chapter 15 Using RA 6300 Security
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
A-322
If the enable_security parameter is set to Y and a preferred security server
is configured, the RA 6300 calls the ppp_security function in the
acp_policy.c file with the user's name and password as entered and the
service set to SERVICE_FTP. If ACP grants access, the FTP daemon will
ask for an "account." The RA 6300 compares the text entered at this
prompt against its administrative password for an added level of security.
If the enable_security parameter is set to Y and the preferred security
server is not reachable, the RA 6300 denies access to the FTP daemon.
When the validation process is complete, the RA 6300 logs FTP access
in the ACP logfile (see Host-based Security Logging on page B-33) and
updates the who command display to look something like this:
annex: who
Port What User
1 PSVR ---
v1 CLI hobbes ---
v2 FTPD hobbes ---
annex:
The RA 6300 FTP daemon is compatible with all versions of UNIX
ftp.
You can completely disable the RA 6300 FTP daemon by setting ftpd
in the disabled_modules parameter.
Location When
jdcm 4:06am 3:37 192.9.200.60
console
4:07am
2:43pm
Book A
Idle Address
192.9.200.60
bryce