Output_Is_Activity; Output_Start_Char; Output_Stop_Char; Output_Ttl - Bay Networks 6300 Supplement Manual

Supplement to the remote annex administrator’s guide for unix

Hide thumbs Also See for 6300:

Table of Contents

Conﬁguration Parameters

output_is_activity

This asynchronous port parameter deﬁnes activity as output. When

enabled, the RA 6300 resets the inactivity timer when it sends output

from the port. If the line type is hardwired, the RA 6300 also places an

entry in the who table. A Y enables this parameter, an N disables it. The

default is N.

output _ start _ char

This asynchronous port parameter deﬁnes the control character sequence

that restarts output if output_ﬂow_control is set to start/stop. The

output _ stop _ char

This asynchronous port parameter deﬁnes the control character sequences

that stops output if the output_ﬂow_control parameter is set to start/

stop. The default is

This Annex parameter sets the time-to-live (TTL) for packets the

RA 6300 generates for RIP updates. TTL is a ﬁeld in IP packets that limits

their lifetime on the network. Each time a packet crosses a router, the

router decrements the packet's TTL by 1. When the value reaches 0, the

packet is discarded. Allowable values range from 1 to 255. The default

Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX