Node_Id; Num_B_Channels; Option_Key - Bay Networks 6300 Supplement Manual

Book C
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX

node_id

This Annex parameter specifies the address the RA 6300 tries to acquire
at start-up. If this address is in use, the RA 6300 must acquire a new node
ID. The node_id is an AppleTalk address in the form net.node. Valid net
values are 0 to 65534; valid node values are 0 to 254. The default is 0.0.

num_b_channels

This PRI line parameter specifies the maximum number of B channels
that can be used with the RA 6300. Valid values are 1–23 for T1/PRI and
1–30 for E1/PRI. The default is 0, which the RA 6300 interprets as 23
for T1/PRI connections (in the U.S.) and 30 for E1/PRI connections (in
Europe and Australia). The only time you might want to change the
default is in Europe, where telephone company providers support PRI
connections with fewer than 30 channels (which can be cheaper.)

option_key

This Annex parameter enables the following features:
• The AppleTalk-specific functions and parameters.
• The CLI tn3270 command.
• Filtering and dial-out
• IPX.
These features are available separately or in any combination. Each
RA 6300 requires a unique key value for the feature(s) you choose;
contact your supplier to obtain an option_key value.
Chapter 2 Configuration Parameters
C-79