Chapter 2
Configuration Parameters
Book C
pref_secure1_host
This Annex parameter specifies the IP address of the security server to
which the RA 6300 first sends security requests. This parameter works
only if the enable_security parameter is set to Y. The default is 0.0.0.0.
pref_secure2_host
This Annex parameter specifies the IP address of the host that is the back-
up server if the host specified in pref_secure1_host is not available. This
parameter works only if the enable_security parameter is set to Y. The
default is 0.0.0.0.
printer_host
This asynchronous port parameter specifies the IP address or fully
qualified domain name of a machine running a Berkeley-style lpd server.
The tn3270 command uses this server for the print-screen function.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-90