Bay Networks 6300 Supplement Manual page 102

Chapter 3 Configuring the PRI Interface, Global Ports, and Sessions
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
A-74
• Set the allow_broadcast parameter to N if you want to disable
the display of administrative messages generated with the na
command broadcast.
• The user_name and location parameters are used for
administrative information. The CLI who command displays
this information. Also, the user_name is passed in the rlogin
command's connection request. If the user does not have an
account on the host under the same user name you defined with
the user_name parameter, the user must issue the rlogin –l
command.
• The term_var parameter is a string identifying the terminal
emulation type. Any value defined for this parameter is passed
with both the telnet and rlogin connection requests. If you
define a terminal emulation type, it must be one that is valid for
the host to which the user is connecting. The RA 6300 uses this
parameter internally for the edit command only.
• CLI activity timers provide simple security by resetting idle user
connections. Limited resources, like dial-in modems, are
released when not in use.
The inactivity_timer specifies the amount of time in minutes
that the remote user can be inactive before the RA 6300 resets
the connection. When this timer expires, all of the user's CLI
connections to hosts are terminated. Allowable values for this
parameter are 0 to 255. The default is 0 (displays as off).
Activity can be set to input (data received from the user), output
(data sent to the user), or both. Set the input_is_activity
parameter to Y and/or the output_is_activity parameter to Y.
• The cli_inactivity timer specifies the amount of time in minutes
that a CLI connection to a host can remain inactive before the
RA 6300 drops the connection. Allowable values for this
parameter are 0 to 255, and immediate. The immediate setting
directs the RA 6300 to drop the connection immediately after
the last host connection closes. The default is 0.
Book A