Chapter 2
Configuration Parameters
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-88
ppp_username_remote
This asynchronous/synchronous port parameter defines the user name by
which the RA 6300 identifies itself when the remote PPP peer asks for
authentication. The string size ranges from 0 to 15 characters. The default
is a null string ("").
pref_dump_addr
This Annex parameter specifies the IP address for the preferred dump
host. This is the host to which the RA 6300 first tries to dump. The default
is 0.0.0.0.
A dump is not sent if the address is set to the default value.
pref_load_addr
This Annex parameter specifies the IP address for the preferred load host.
This is the host to which the RA 6300 first requests a load of its operational
code. The default is 0.0.0.0.
Set this address to the boot host's IP address.
pref_mop_host
This Annex parameter specifies the Ethernet address of the preferred
MOP load or dump host. This address consists of six parts separated by
dashes. Each part contains a hexadecimal value. The default value is 00-
00-00-00-00-00.
Book C