Bay Networks 6300 Supplement Manual page 488

Chapter 2 Configuration Parameters
Setting Port
Parameters
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-32
Unlike port parameters used with other Annexes, the Remote Annex 6300
port parameters are global. This means that each parameter applies to all
internal ports of the type listed in the parameter description: asynchronous
(asy and ta) and synchronous (syn).
To set a global port parameter to its default value, use the set port
command:
set port port_parameter ^@
1.
set port port_parameter ""
2.
3. set port port_parameter default
The set port_parameter ^@ command sets parameters that have
port
single-character default values. Enter the default value as a two-character
sequence consisting of the circumflex character (^) followed by the at
sign (@). For example, to set erase_word to its default value, ^W, enter:
command: set port erase_word ^@
The set port_parameter "" command sets parameters that require a
port
string; these parameters default to either a null string ("") or "<unset>".
For example, to set user_name to its default, the null string, enter:
command: set port user_name ""
The set port_parameter default command sets all other parameters.
port
These parameters are set by choosing either an option from a known list
or a yes/no response. The keyword default sets these parameters to their
default values.
Book C