Chapter 1
na Commands
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-10
copy
The copy command requires superuser privileges.
The copy command copies a given set of parameters from one RA 6300
(or global port) to another RA 6300 (or global port).
each copy command. The syntax is:
copy annex annex_identifier annex_list
copy interface interface_name@annex_identifier interface_set
copy printer printer_number@annex_identifier printer_set
copy port@annex_identifier
Table C-5. Descriptions of the copy Command
Command
copy annex
copy interface
copy port
Description
Copies all RA 6300-wide parameters except the
IP address, the administrative password, the
access control protocol key, LAT key, option
key, and the virtual CLI password from the
specified RA 6300 to the annex_list.
Copies all interface parameters from the
specified interface to the interface_set.
Copies all global port parameters except the port
password from the current RA 6300 to the
RA 6300 specified by annex_identifier .
Book C
Table C-5
defines