Ip_Forward_Broadcast; Ipso_Class - Bay Networks 6300 Supplement Manual

Chapter 2 Configuration Parameters Book C

ip_forward_broadcast

This Annex parameter allows an RA 6300 to broadcast a packet to the
SLIP or PPP interfaces. When the RA 6300 receives a packet sent to a
broadcast address (except 0.0.0.0 and 255.255.255.255), it scans the list
of installed interfaces and matches the broadcast address against the
interface's remote address using a subnet or net mask. If these addresses
match, the RA 6300 copies the packet to that interface. When disabled,
the RA 6300 does not scan the interface list and does not copy broadcast
packets. A Y enables this parameter, an N disables it. The default is N.

ipso_class

This asynchronous port parameter specifies the U.S. Department of
Defense basic IP Security Option (IPSO) classification level included in
TCP packets generated locally on RA 6300 CLI, dedicated, or adaptive
asynchronous ports.
The option is not added to locally generated ICMP messages, RIP
updates, or other system packets. The RA 6300 does not check incoming
packets for the presence of the IPSO. Valid options for the classification
level are topsecret, secret, confidential, unclassified, and none. If you
specify none, no IPSO classification is added. The default is none.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-60