Book C
Chapter 2
Configuration Parameters
enable_security
This Annex parameter activates the security system. To enable any
security features, set this parameter to Y. A Y enables this parameter, an
N disables it. The default is N.
erase_char
This asynchronous port parameter defines a control character sequence
for the CLI erase character. The default is the Delete key (displayed as
).
^?
erase_line
This asynchronous port parameter defines a control character sequence
for the CLI line erase character. The default is
.
CTRL-U (^U)
fdl_type
This PRI line parameter specifies the type of Facilities Data Link
supported by the telephone company for your PRI line. Valid values are
att and ansi. This parameter is applicable only to internal CSUs used
with T1/PRI lines.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-53