Ipx_Security; Table C-23. Arguments Used With Ipx_Node Parameter - Bay Networks 6300 Supplement Manual

Book C
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX

Table C-23. Arguments used with ipx_node parameter

Argument Description
channel_range An integer specifying the number of a single B channel,
a list of B channel numbers separated by commas, a
range of B channel numbers separated by a hyphen, or
the keyword all, which specifies all B channels. If not
specified, 23 (for PRI/T1 lines) or 30 (PRI/E1 lines) IPX
node numbers are assigned based on the value of
increment.
node_number The IPX node number to be assigned to the B channel if
only one channel is specified in channel_range, or the
IPX node number to be assigned to the first channel in
channel_range.
increment An integer specifying how node _number is to be
incremented to automatically generate IPX network
addresses for the B channels specified in channel_range.
For example, if you set channel_range to 1, 2, 3,
node _number to 00-00-00-00-00-01 , and increment to
4, the RA 6300 assigns IPX node numbers 00-00-00-00-
00-05 , 00-00-00-00-00-09 , and 00-00-00-00-00-0D to
the B channels. The default increment is 0.

ipx_security

This asynchronous port parameter controls whether or not IPX security
is enabled on the port. A Y enables this parameter, an N disables it. The
default is N.
Chapter 2 Configuration Parameters
C-65