Bay Networks 6300 Supplement Manual page 82

Supplement to the remote annex administrator’s guide for unix

Hide thumbs Also See for 6300:

Table of Contents

Conﬁguring the PRI Interface, Global Ports, and Sessions

Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX

Table A-4. Parameters for the set pri Command (continued)

num_b_channels

analog_encoding

The maximum number of B channels that can be used

with the RA 6300. The default is 0, which the RA

6300 interprets as 23 for T1/PRI connections (in the

U.S.) and 30 for E1/PRI connections (in Europe and

Australia). Valid values are 1–23 for T1/PRI and 1–

30 for E1/PRI. The only time you might want to

change the default is in Europe, where telephone

company providers support PRI connections with

fewer than 30 channels (which can be cheaper).

(Applies only to RA 6300s with internal CSUs). A

string deﬁning the CSU transceiver line provided by

the telephone company. Valid values are:

0db (the default)

The encoding type used for modem calls. Valid

a_law (used for E1/PRI lines in Europe)

mu_law (used for T1/PRI in the U.S.)

auto (the default, which uses a_law or mu_law as

appropriate)

Typically, you do not need to change this parameter.

To check that the correct value is being used, issue

the pri command from the superuser CLI.