Bay Networks 6300 Supplement Manual page 408

Chapter 1 Network Administration Book B
The stats –p command displays statistics for all parallel ports:
The RA 6300 does not support parallel ports.
The superuser stats –c command clears all serial line statistics to zero.
The stats –m command displays statistics for active control lines, but
displays the modem controls for inactive control lines rather than
displaying idle.
The stats –m < >command displays statistics for
number_range
asynchronous ports in specified number range. For example, specifying
a range of 1 through 8 (stats -sta1-8) displays statistics for the first eight
synchronous (asy) ports.
The stats –sta< > displays statistics for terminal adapter (ta)
number_range
ports in the specified number range. For example, specifying a range of
1 through 8 (stats -sta1-8) displays statistics for the first eight terminal
adapter (ta) ports.
The stats –ssyn< > displays statistics for synchronous (syn)
number_range
ports in the number range. For example, specifying a range of 1 through
4 (stats -ssyn1-4) displays statistics for the first four synchronous ports.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
B-42