Password; Quit - Bay Networks 6300 Supplement Manual

Chapter 1 na Commands Book C

password

The password command allows you to define a default password for the
current na session. This command is useful when administering several
RA 6300s with the same password. The syntax is:
password [password]
If you enter the command without giving the password, the RA 6300
prompts for one, but does not echo it:
command: password
password:
When accessing an RA 6300 with security enabled using the annex
command, na will try to match the RA 6300's default password with the
administrative password. If they match, access is authorized
automatically; if they do not match, na prompts for the RA 6300-specific
administrative password. Enter a password for a given RA 6300 only
once during an na session, even if the RA 6300 is dropped or the default
annex_list is changed.

quit

The quit command terminates the na program from a script file; na quits
when it receives an end-of-file character (usually ) or when it
CTRL-D
reaches the end of an input file. The syntax is:
quit
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-16