Bay Networks 6300 Supplement Manual page 318

Chapter 15 Using RA 6300 Security
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
A-290
Error Handling for Password Histories and Blacklisting
The following error conditions can occur:
• If erpcd cannot read or write to the acp_dbm database or
detects incorrect protection, the event is syslogged at level
LOG_CRIT and all users are denied access until erpcd can read
and write to acp_dbm.
If the wrong protection is detected, the syslogged message is:
Security problem: Wrong protection (not 600) on acp_dbm database.
If erpcd cannot read or write to acp_dbm, the message is:
Cannot [read from | write to] acp_dbm database.
• If the acp_dbm utility fails to read or write the acp_dbm
database, it generates the following message:
acp_dbm: Error [reading from | writing to] acp_dbm database.
If the utility detects the wrong protection, it generates the
following message:
acp_dbm: Wrong protection (not 600) on acp_dbm database.
• If the ch_passwd utility fails to read or write the acp_dbm
database, ch_passwd generates the message:
ch_passwd: Error [reading from | writing to] acp_dbm database.
Notify System Administrator. Password change cancelled.
If ch_passwd detects the wrong protection, it generates the
message:
ch_passwd: Wrong protection (not 600) on acp_dbm database.
Notify System Administrator. Password change cancelled.
Book A