Show - Bay Networks 6300 Supplement Manual

Book C
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
Sample command lines for setting port parameters are:
command: set port data_bits 7
command: set port stop_bits 1
command: set port parity odd
command: set port control_lines none
command: set port mode cli
command: set port inactivity_timer 120

show

The show command displays current RA 6300, interface, global port, or
pri parameters:
show annex
show interface
show port
show pri
show pri b
The syntax is:
show annex [=annex_list] [keyword | annex_parameters]
show interface [=interface_list] [keyword | interface_parameters]
show port [keyword | port_parameters]
show pri [keyword | pri_line parameters]
show pri b [=range] b_channel_parameters
Chapter 1
Displays RA 6300 parameters.
Displays interface parameters.
Displays the global port parameters.
Displays PRI parameters.
Displays PRI b-channel parameters.
na Commands
C-21