Ipx_File_Server; Ipx_Frame_Type; Ipx_Network - Bay Networks 6300 Supplement Manual

Chapter 2 Configuration Parameters Book C
ipx_file_server
This Annex parameter contains the name of the Novell file server from
which the RA 6300 boots. The string size ranges from 0 to 48 characters.
This parameter has no default value.

ipx_frame_type

This Annex parameter defines the framing used for IPX packets on the
Ethernet interface. Valid options are ethernetII, raw802_3, 802_2, or
802_2snap. The default is raw802_3.

ipx_network

This PRI B channel parameter associates IPX network address(es) with
B channel(s). This parameter works only when the mode parameter is set
to ppp. The syntax is:
set pri b[=channel_range | all] ipx_network net_number [increment]
net_number is a
4-byte, Novell network number that the RA 6300 suggests for
the remote PC client on an IPXCP (IPX over PPP) link. Valid values are 00000001
0.
to FFFFFFFF, or Leading zeroes, if any, should be included. The network
number must be unique on the network and on the RA 6300 itself.
When the IPXCP connection is established, the RA 6300 and the client
negotiate the network number, each suggesting a value. The peer
suggesting the highest number wins the negotiation, and the network
number is set to that value. If both ends of the link set the network number
to 0, a unique, randomly-generated number is used as the default.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-62