Connect_Security; Data_Bits; Daylight_Savings - Bay Networks 6300 Supplement Manual

Book C Chapter 2 Configuration Parameters
config_file
This Annex parameter defines the file name for the configuration file
maintained on the load host. This file contains information about
gateways, macros, and services; it must reside in the directory /usr/spool/
erpcd/bfs. The default file name is config.annex.

connect_security

This asynchronous port parameter enables the host-based security policy
for access from the CLI to the network (using telnet and rlogin only). If
connect_security is enabled, the user must receive authorization to
connect to a host on the network. The supplied security policy scans the
file /install-directory/acp_restrict to authorize a connection to a host
from the RA 6300. If authorization is not granted, the connection is not
made. A Y enables this parameter, an N disables it. The default is N.

data_bits

This asynchronous port parameter defines the number of data bits in a
character. This value does not include the start, stop, or parity bits.
Allowable values are 5 through 8. The default is 8.

daylight_savings

This Annex parameter defines the daylight savings time for your
geographic location. The RA 6300 uses this parameter to adjust the time
display for daylight savings time. Valid options are us, australian,
british, canadian, east_european, mid_european, west_european,
and none; the default is us.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-49