User_Name; V120_Mru; Vcli_Groups - Bay Networks 6300 Supplement Manual

Chapter 2 Configuration Parameters Book C

user_name

This asynchronous/synchronous port parameter defines an asy or sync
port's user name as a string. The CLI who command displays this value;
the CLI rlogin command passes this value to a host. The default is a null
string ("").

v120_mru

This asynchronous parameter applies exclusively to V.120 (TA)
connections. It allows you to change the number of bytes allowed in an
incoming V.120 frame if your TA cannot handle the default of 256 bytes.
Valid values are 30–260.

vcli_groups

This Annex parameter specifies which LAT remote group code is
assigned to virtual CLI users. All virtual CLI users have the same group
code. Values are specified as a series of numbers separated by commas
(e.g., 1,5,7) or a range of numbers separated by a dash (e.g., 200-255).
Following the range, specify the keyword enable or disable. Allowable
values are all, none, or numbers between 0 and 255. Following the range,
specify the keyword enable or disable. The default is none enable.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-108