Disabled_Modules - Bay Networks 6300 Supplement Manual

Book C
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX

disabled_modules

This Annex parameter allows you to disable individual software modules
to free memory space. If you enter more than one module, separate
module names using commas. Valid options are admin, atalk, edit,
fingerd, ftpd, ipx, lat, nameserver, ppp, slip, snmp, tn3270, tstty, vci,
all, or none. The default is vci (disables the RA 6300 VMS interface).
You should exercise extreme caution when disabling modules:
• Entering a null string ("") sets this parameter to its default
value.
• If disabled_modules is set to a value other than none and
server_capability includes the operational image, no
modules are disabled; a syslog message announces this
override.
• The vci option disables the RA 6300 interface for VMS
environments along with the following commands:
backwards, change, clear, crash, define, disconnect,
forward, list, logout, resume, set, show.
• If lat_key is invalid and server_capability is set to none, the
LAT code is freed for use by the system.
• Disabling LAT also disables the CLI commands services,
connect, and queue.
• Disabling admin and snmp can cause problems if host-based
na is not available. To change parameters in this case, return
to monitor mode, erase the parameters in non-volatile
memory, and reconfigure the RA 6300.
Chapter 2 Configuration Parameters
C-51