Chapter 2
Configuration Parameters
Book C
map_to_upper
This asynchronous port parameter enables an RA 6300 to convert
lowercase characters sent to a terminal into uppercase characters. This
conversion occurs only at the CLI level. Enable this parameter for older
terminals that do not support upper case characters. A Y enables this
parameter, an N disables it. The default is N.
max_session_count
This asynchronous port parameter specifies the number of active sessions
(jobs) allowed per port. The allowable values range from 1 to 16. The
default is 3.
max_chap_chall_int
This Annex security parameter enables the RA 6300 to re-issue a CHAP
challenge to a remote node at random times during the course of a PPP
connection. The parameter itself specifies the maximum number of
seconds in the interval from which the RA 6300 randomly chooses the
times to re-issue the challenge. Valid values are 0 to 65535 (approximately
18.2 hours). For example, a value of 60 specifies an interval ranging from
one to 60 seconds. The default is 0, which disables the re-issuing of
challenges.
max_vcli
This Annex parameter determines the maximum number of virtual CLI
connections the RA 6300 can create at a time. Allowable values are the
string unlimited or a decimal number from 0 to 254. A value of 0 prevents
any virtual CLI connections. The default is unlimited.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-72