Bay Networks 6300 Supplement Manual page 569

Supplement to the remote annex administrator’s guide for unix

Hide thumbs Also See for 6300:

Table of Contents

Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX

For the RA 6300, the default value for the baud parameter set

by the stty command is 115200, not 9600. Also, the default

value for the oﬂow argument is eia for the RA 6300.

The tap command has a new argument, –f. Specifying this

argument forces a tap to occur and allows you to tap across

several calls on one internal port.

When conﬁguring tn3270 to be run from the RA 6300, you will

probably want to set the term_var parameter within an SPB, not

via na or admin, since it is unlikely that all the terminals you

use will have exactly the same characteristics.

The output from the who command has changed slightly (see

Network Administration on page B-1).

Using the CLI Commands