Bay Networks 6300 Supplement Manual page 346

Supplement to the remote annex administrator’s guide for unix

Hide thumbs Also See for 6300:

Table of Contents

Using RA 6300 Security

Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX

Edit the make.conﬁg ﬁle in the /annex/root/src directory:

# vi make.config

Locate the following line, which is near the bottom of

CFG_STUBLINKING = -L. -lstubs

Change the line to include the SafeWord library, as follows:

CFG_STUBLINKING = ../enigma/libidpb.a -L. -lstubs

If erpcd is running on the host, kill the existing erpcd process

(your process number will vary):

# ps –ax | grep erpcd

25493 ? IW 0:00 ./erpcd

25797 p1 S 0:00 grep erpcd

# kill -9 25493

Rebuild erpcd:

# make erpcd. If you have linkage errors, try running

the ranlib utility on the sdclient.a library:

# ranlib enigma/lipidpb.a

# make erpcd

Install erpcd into the usr/annex directory:

# make install

Restart erpcd:

# /usr/annex/erpcd

10. On the RA 6300, use admin or na to set pref_secure1_host to the

Internet address of the host running SafeWord and erpcd.

You can enter the backup host's address in the pref_secure2_host